The IEDC2004 series are environmentally sealed, MCC97 compliant M.I.L.E.S. transmitters that radiate infrared weapon and PID codes
Operates from an external 5 Volt source
Crystal controlled embedded 8-bit micro-controller
Energy efficient diode drive circuit for extended battery life
Eight word packet transmissions
Range: Up to 7 meters
Operating Temperature: -20 degs C. to +70 degs C.
Storage Temperature: -40 degs C to +80 degs C
10 Amps (peak) output diode current
Emitter Wavelength: 880 nm
Input Current: 100uA
NORMAL OPERATING PROCEDURES
STANDALONE OPERATION (beacon)
Connect the black wire to ground and the red wire to a +5 VDC source.
The green wire can be configured in either of two methods depending on the desired output mode:
Attach the green wire to ground for Claymore mine output. In this mode, a 96 word Claymore mine packet is sent when the 5 Volt input rises. The 5 Volts must be switched off then on to deliver the next burst.
Connect the green wire to a normally open switch to ground. This is the small arms mode. Each time the green lead is pulled low, an 8-word small-arms-hit packet is transmitted.